ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation

 Chapter 11 Wireless LAN

EMG2926-Q10A User’s Guide

Use this screen when you want to add a wireless station using WPS. To open this screen, click 
Network > Wireless LAN 2.4G/5G > WPS Station tab.

Note: After you click Push Button on this screen, you have to press a similar button in 

the wireless station utility within 2 minutes. To add the second wireless station, you 

have to press these buttons on both device and the wireless station again after the 

first 2 minutes.

Network > Wireless LAN 2.4G/5G > WPS Station

The following table describes the labels in this screen.

Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is 
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at 
certain times. To open this screen, click Network > Wireless LAN 2.4G/5G > Scheduling tab.

Apply

Click Apply to save your changes back to the EMG2926-Q10A.

Cancel

Click Cancel to reload the previous configuration for this screen.

Network > Wireless LAN 2.4G/5G > WPS (continued)

Network > Wireless LAN 2.4G/5G > WPS Station

Push Button

Use this button when you use the PBC (Push Button Configuration) method to configure 
wireless stations’s wireless settings. 

Click this to start WPS-aware wireless station scanning and the wireless security 
information synchronization. 

Or input station’s 
PIN number

Use this button when you use the PIN Configuration method to configure wireless 
station’s wireless settings. 

Type the same PIN number generated in the wireless station’s utility. Then click Start to 
associate to each other and perform the wireless security information synchronization.