ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation

Chapter 11 Wireless LAN

EMG2926-Q10A User’s Guide

Select WPA-PSK or WPA2-PSK from the Security Mode list.

Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK

Authentication 
Method

Select Auto or Shared Key from the drop-down list box.

This field specifies whether the wireless clients have to provide the WEP key to login to 
the wireless client. Keep this setting at Auto unless you want to force a key verification 
before communication between the wireless client and the EMG2926-Q10A occurs. 

Select Shared Key to force the clients to provide the WEP key prior to communication. 

ASCII

Select this option in order to enter ASCII characters as WEP key. 

Hex

Select this option in order to enter hexadecimal characters as a WEP key. 

The preceding "0x", that identifies a hexadecimal key, is entered automatically.

Key 1 to Key 4

The WEP keys are used to encrypt data. Both the EMG2926-Q10A and the wireless 
stations must use the same WEP key for data transmission.

If you chose 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters 
("0-9", "A-F").

If you chose 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F"). 

You must configure at least one key, only one key can be activated at any one time. The 
default key is key 1.

Apply

Click Apply to save your changes back to the EMG2926-Q10A.

Cancel

Click Cancel to reload the previous configuration for this screen.

Network > Wireless LAN 2.4G/5G > General: Static WEP (continued)