ZyXEL Communications Corporation EMG2926Q10A Manuel D’Utilisation

 Chapter 11 Wireless LAN

EMG2926-Q10A User’s Guide

The following table describes the labels in this screen.

Select WPA or WPA2 from the Security Mode list. 

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2 

in the Wireless LAN 2.4G/5G > General screen.

Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK

Security Mode

Select WPA-PSK or WPA2-PSK to enable data encryption.

WPA-PSK 
Compatible

This field appears when you choose WPA2-PSK as the Security Mode.

Check this field to allow wireless devices using WPA-PSK security mode to connect to 
your EMG2926-Q10A.

Pre-Shared Key 

WPA-PSK/WPA2-PSK uses a simple common password for authentication.

Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.

Group Key Update 
Timer

The Group Key Update Timer is the rate at which the AP sends a new group key out to 
all clients. 

The default is 3600 seconds (60 minutes).

Apply

Click Apply to save your changes back to the EMG2926-Q10A.

Cancel

Click Cancel to reload the previous configuration for this screen.