ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation

 Chapter 6 Tutorials

EMG6765-Q10A User’s Guide

Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks and tap WPS Push Button or the 
WPS icon (

Note: It doesn’t matter which button is pressed first. You must press the second button within 

two minutes of pressing the first one. 

The EMG6765-Q10A sends the proper configuration settings to the wireless client. This may take up to 
two minutes. The wireless client is then able to communicate with the EMG6765-Q10A securely.

The following figure shows you an example of how to set up a wireless network and its security by 
pressing a button on both EMG6765-Q10A and wireless client (the Android 4.4.2 phone in this example).

Figure 16   Example WPS Process: PBC Method

When you use the PIN configuration method, you need to check the client’s PIN number and use the 
EMG6765-Q10A’s configuration interface.

Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS PIN Entry to get a 
PIN number.

Then go to Configuration > Network > Wireless LAN 2.4G or 5G > WPS Station screen. Enter the client’s PIN 
number to the PIN field. Click the Start button (or button next to the PIN field) on the EMG6765-Q10A WPS 
Station screen within two minutes.