ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation

Chapter 6 Tutorials

EMG6765-Q10A User’s Guide

• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See 

. This is the easier method.

• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal 

Identification Number) in the EMG6765-Q10A’s interface. See 

. This is the 

more secure method, since one device can authenticate the other.

Make sure that your EMG6765-Q10A is turned on and that it is within range of your computer. 

Push and hold the WPS button located on the EMG6765-Q10A’s side panel for more than 1 second. 
Alternatively, you may log into EMG6765-Q10A’s web configurator and go to the Configuration > 
Network > Wireless LAN 2.4G or 5G > WPS screen. Enable the WPS function and click Apply. WPS is 
enabled by default on the EMG6765-Q10A. 

Then go to the Configuration > Network > Wireless LAN 2.4G or 5G > WPS Station screen and click the 
Push button.

Note: Your EMG6765-Q10A has a WPS button located on the side of the device as well as a 

WPS button in its web configurator. Both buttons have exactly the same function: you 

can use one or the other.

1

2