ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation
Chapter 6 Tutorials
EMG6765-Q10A User’s Guide
46
Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall
settings to allow specific traffic to pass through.
settings to allow specific traffic to pass through.
6.6 Access the EMG6765-Q10A Using DDNS
If you connect your EMG6765-Q10A to the Internet and it uses a dynamic WAN IP address, it is
inconvenient for you to manage the device from the Internet. The EMG6765-Q10A’s WAN IP address
changes dynamically. Dynamic DNS (DDNS) allows you to access the EMG6765-Q10A using a domain
name.
inconvenient for you to manage the device from the Internet. The EMG6765-Q10A’s WAN IP address
changes dynamically. Dynamic DNS (DDNS) allows you to access the EMG6765-Q10A using a domain
name.
To use this feature, you have to apply for DDNS service at, for example, www.dyndns.org.
This tutorial covers:
•
•
•
Note: If you have a private WAN IP address, then you cannot use DDNS.
6.6.1 Registering a DDNS Account on www.dyndns.org
1
Open a browser and type http://www.dyndns.org.
2
Apply for a user account. This tutorial uses UserName1 and 5 as the username and password.
3
Log into www.dyndns.org using your account.
4
Add a new DDNS host name. This tutorial uses the following settings as an example.
• Hostname: zyxelrouter.dyndns.org
• Service Type: Host with IP address
• IP Address: Enter the WAN IP address that your EMG6765-Q10A is currently using. You can find the IP
• Service Type: Host with IP address
• IP Address: Enter the WAN IP address that your EMG6765-Q10A is currently using. You can find the IP
address on the EMG6765-Q10A’s Web Configurator Status page.
Then you will need to configure the same account and host name on the EMG6765-Q10A later.