ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation
Chapter 9 Wireless LAN
EMG6765-Q10A User’s Guide
76
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the
network using WPS in the
9.2 General Wireless LAN Screen
Use this screen to configure the SSID and wireless security of the wireless LAN.
Note: If you are configuring the EMG6765-Q10A from a computer connected to the wireless
LAN and you change the EMG6765-Q10A’s SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then change
the wireless settings of your computer to match the EMG6765-Q10A’s new settings.
Click Network > Wireless LAN 2.4G/5G to open the General screen.
Figure 33 Network > Wireless LAN 2.4G/5G > General
The following table describes the general wireless LAN labels in this screen.
Table 18 Network > Wireless LAN 2.4G/5G > General
LABEL
DESCRIPTION
Wireless Setup
Wireless LAN
Select Enable to activate the 2.4GHz and/or 5GHz wireless LAN. Select Disable to turn it off.
Note: You can enable or disable both 2.4GHz and 5GHz wireless LANs by using the
WIFI button located on the side panel of the EMG6765-Q10A.
Name (SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical English
language keyboard) for the wireless LAN.
associated. Enter a descriptive name (up to 32 printable characters found on a typical English
language keyboard) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
obtain the SSID through scanning using a site survey tool.