ZyXEL Communications Corporation EMG6765-Q10A Manuel D’Utilisation
Chapter 9 Wireless LAN
EMG6765-Q10A User’s Guide
78
See the rest of this chapter for information on the other labels in this screen.
9.3 Wireless Security
The screen varies depending on what you select in the Security Mode field.
9.3.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any data
encryption.
encryption.
Note: If you do not enable any wireless security on your EMG6765-Q10A, your network is
accessible to any wireless networking device that is within range.
Figure 34 Network > Wireless LAN 2.4G/5G > General: No Security
Security Mode
Select WPA2-PSK or WPA2 to add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security settings as this device.
After you select to use a security, additional options appears in this screen. See
want to associate to this network must have same wireless security settings as this device.
After you select to use a security, additional options appears in this screen. See
for detailed information on different security modes. Or you can select No Security to
allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Apply
Click Apply to save your changes back to the EMG6765-Q10A.
Cancel
Click Cancel to reload the previous configuration for this screen.
Table 18 Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
DESCRIPTION