ZyXEL Communications Corporation G210H Manuel D’Utilisation

ZyXEL G-210H User’s Guide

46

Chapter 4 Wireless Station Mode Configuration

Figure 27   Station Mode: Adapter 

The following table describes the labels in this screen. 

Table 11   Station Mode: Adapter 

Adapter Setting

Transfer Rate

In most networking scenarios, the factory default Auto setting is the most efficient 

and allows your G-210H to operate at the highest possible transmission (data) 

rate. 
If you want to select a specific transmission rate, select one that the AP or peer 

wireless device supports. 

Note: With USB1.0/1.1, the G-210H can only transmit at up to 

11Mbps.

Wireless Mode

Select the wireless mode you wish to have the G-210H

 

transmit in. Available 

options are to be transmitting in 802.11B/G Mixed mode which will 

alternate between 802.11B and 802.11G depending on the network 

environment, or 802.11B Only which will force the 

G-210H to broadcast in 

802.11B network only.

11B/G Protection

The factory default setting is on Auto which is the most efficient and will allow your 

G-210H to automatically configure the network settings to best navigate through 

interfering networks.

Enable Tx Burst

Transmission bursting is a method that can boost performance by pushing high 

number of frames of data per transmission packet.  Check this box to enable this 

feature.

Fast Roaming at

Fast Roaming is a feature that allows your G-210H to search for Access Points 

while you’re moving at a faster rate.  Select at which dBm you wish for this feature 

to activate with the drop down menu

Enable WMM

WMM is the WiFi standard for wireless Quality of Service.  Click on this button and 

then select from the two available check boxes Direct Link and WMM-Power 

Save Enable.

Save

Click Save to save the changes to the G-210H.