ZyXEL Communications Corporation G570SV2 Manuel D’Utilisation
Chapter 8 Management Screens
ZyXEL G-570S
v2 User’s Guide
93
Figure 54 Configuration Upload Error
8.4.3 Back to Factory Defaults
Clicking the RESET button in this section clears all user-entered configuration information
and returns the device to its factory defaults. The following warning screen will appear.
and returns the device to its factory defaults. The following warning screen will appear.
Figure 55 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
device. Refer to the section on resetting the device for more information on the RESET
button.
device. Refer to the section on resetting the device for more information on the RESET
button.
8.5 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.rmt extension, for example, "zyxel.rmt". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
.rmt extension, for example, "zyxel.rmt". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Management > F/W Upload to display the screen as shown. Follow the instructions in
this screen to upload firmware to your device.
this screen to upload firmware to your device.
Figure 56 Management: F/W Upload