ZyXEL Communications Corporation NBG2105 Manuel D’Utilisation

Chapter 3 Operation Modes

NBG2105 User’s Guide

An access point enabled all ethernet ports to be bridged together and be in the same subnet. To 
connect to the Internet, another device, such as a router, is required. In Access Point Mode:

• All clients belong to the same subnet. 
• All clients of the device are LAN clients. There is no WAN connection.
• The DHCP server is disabled. 
• The IP address of the device on the local network is set to 192.168.1.2.

MAC Filtering Use this to allow or deny wireless stations based on their MAC addresses from connecting 

to the NBG2105.

Firewall

Port Filtering

Use this to apply filtering based on UDP or TCP port numbers. 

IP Filtering

Use this to apply filtering based on IP addresses.

MAC Filtering Use this to apply filtering based on MAC addresses.

URL Filtering

Use this to apply filtering based on URLs.

Management

NTP

Use this to change your NBG2105’s time and date.

Password

Use this to change your NBG2105’s system password.

Upgrade 

Firmware

Use this to upload firmware to your NBG2105.

Backup/

Restore

Use this to view information related to factory defaults, backup configuration, and 
restoring configuration.

Operation

Use this to change between access point mode and router mode.

Language

Use this to select the language you prefer.

Reboot

Use this to restart the NBG2105 without turning the power off.

Status

Status

Use this to view system, wireless, local and WAN network information, as well as general 
information about the NBG2105.

Statistics

Use this to show the number of packets sent and received on the Wireless LAN and 
Ethernet WAN interfaces.

Log

Use this to look at all of the NBG2105’s logs in one location.

Navigation Panel: Router Mode (continued)