ZyXEL Communications Corporation NBG2105 Manuel D’Utilisation

Chapter 13 Wireless LAN

NBG2105 User’s Guide

Wireless LAN > Site Survey: WEP

The following table describes the labels in this screen.

Select WPA-PSK or WPA2-PSK  from the Encryption list.

Wireless LAN > Site Survey: WEP

Encryption

Select WEP to associate with the selected AP using WEP authentication.

Key Type

Select Open, Shared or Both.

This field specifies whether the NBG2105 must provide a WEP key to login to the 
selected access point.

Key Length

Select 64-bit or 128-bit.

This dictates the length of the security key that selected access point is using.

Key Format

Select ASCII to enter ASCII characters as a WEP key. 

Select Hex to enter hexadecimal characters as a WEP key. 

Key Setting

The WEP keys are used to encrypt data. Both the NBG2105 and the access point must 
use the same WEP key for data transmission.

If you chose 64-bit in the Key Format field, then enter any 5 ASCII characters or 10 
hexadecimal characters ("0-9", "A-F").

If you chose 128-bit in the Key Format field, then enter 13 ASCII characters or 26 
hexadecimal characters ("0-9", "A-F"). 

Back

Click this to go back to the initial site survey screen.

Connect

Click this to associate the NBG2105 with the selected access point.