ZyXEL Communications Corporation NBG2105 Manuel D’Utilisation

 Chapter 13 Wireless LAN

NBG2105 User’s Guide

Wireless LAN > Site Survey: WPA2-PSK

The following table describes the labels in this screen.

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS 
status. To open this screen, click Wireless LAN > WPS. The screen varies depending on the 
operation mode in which the NBG2105 is working.

Wireless LAN > Site Survey: WPA-PSK or WPA2-PSK

Encryption

Select WPA-PSK or WPA2-PSK to associate with the selected AP using WPA-PSK or 
WPA2-PSK.

Authentication Mode Personal (Pre-Shared Key) is selected to use a simple common password for 

authentication. 

WPA Cipher Suite

Select TKIP and/or AES to configure which encryption options the NBG2105 uses to 
connect to the selected access point. This appears when WPA encryption is selected. 

WPA2 Cipher Suite

Select TKIP and/or AES to configure which encryption options the NBG2105 uses to 
connect to the selected access point. This appears when WPA2 encryption is selected. 

Pre-Shared Key 
Format

Select Passphrase to make the NBG2105 generate a key from a phrase typed into the 
Pre-Shared Key field.

Select HEX to configure the NBG2105 to accept a key in hexadecimal format in the 
Pre-Shared Key field.

Pre-Shared Key

If Passphrase was selected in the Pre-Shared Key Format field, type a pre-shared 
key from 8 to 63 case-sensitive keyboard characters.

If HEX was selected in the Pre-Shared Key Format field, type a pre-shared key using 
hexadecimal characters ("0-9", "A-F").

Back

Click this to go back to the initial site survey screen.

Connect

Click this to associate the NBG2105 with the selected access point.