ZyXEL Communications Corporation NBG2105 Manuel D’Utilisation

 Chapter 13 Wireless LAN

NBG2105 User’s Guide

Wireless LAN > WPS (Client mode) 

The following table describes the labels in this screen.

The MAC filter screen allows you to configure the NBG2105 to give exclusive access to devices 
(Allow Listed) or exclude devices from accessing the NBG2105 (Deny Listed). Every Ethernet 
device has a unique MAC (Media Access Control) address. The MAC address is assigned at the 
factory and consists of six pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You 
need to know the MAC address of the devices to configure this screen.

To change your NBG2105’s MAC filter settings, click Wireless LAN > MAC Filtering.

Wireless LAN > WPS (Client mode)

Disable WPS

Select this to turn off the WPS feature.

Apply Changes

Click this to save changes back to the NBG2105.

Reset

Click this to begin configuring this screen afresh.

Self PIN Number

This is the WPS PIN (Personal Identification Number) of the NBG2105. Enter this PIN in 
the configuration utility of the device you want to connect to the NBG2105 using WPS.

The PIN is not necessary when you use WPS push-button method.

Start

Use this button when the AP to which the NBG2105 is connecting uses the PIN 
Configuration method to configure wireless station’s wireless settings. 

Click Start to associate to each other and perform the wireless security information 
synchronization. 

Start PBC

Use this button when the AP to which the NBG2105 is connecting uses the PBC (Push 
Button Configuration) method to configure wireless stations’s wireless settings. 

Click Start PBC to start WPS-aware wireless station scanning and the wireless security 
information synchronization.