ZyXEL Communications Corporation NBG6503 Manuel D’Utilisation
Chapter 6 Easy Mode
NBG6503 User’s Guide
48
Note: Don’t worry if the Network Map does not display in your web browser. This feature
may not be supported by your system. You can still configure the Control Panel
(
) in the Easy Mode and the Router features that you want to
use in the Expert Mode.
When you log into the Network Configurator, the Network Map is shown as follows.
Figure 31
Network Map
The line connecting the Router to the gateway becomes green when the Router is able to ping the
gateway. It becomes red when the ping initiating from the Router does not get a response from the
gateway. The same rule applies to the line connecting the gateway to the Internet.
gateway. It becomes red when the ping initiating from the Router does not get a response from the
gateway. The same rule applies to the line connecting the gateway to the Internet.
You can also view the devices (represented by icons indicating the kind of network device)
connected to the Router, including those connecting wirelessly. Right-click on the Router icon to
refresh the network map and go to the Wizard. Right click on the other icons to view information
about the device.
connected to the Router, including those connecting wirelessly. Right-click on the Router icon to
refresh the network map and go to the Wizard. Right click on the other icons to view information
about the device.
6.6 Control Panel
The features configurable in Easy Mode are shown in the Control Panel.
Figure 32
Control Panel
Switch ON to enable the feature. Otherwise, switch OFF. If the feature is turned on, the green light
flashes. If it is turned off, the red light flashes.
flashes. If it is turned off, the red light flashes.
Additionally, click the feature to open a screen where you can edit its settings.