ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation
Chapter 12 LAN
NBG6616 User’s Guide
108
Figure 68
LAN and WAN IP Addresses
The LAN parameters of the NBG6616 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.
12.3.1 IP Pool Setup
The NBG6616 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG6616 itself) in the
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for
mail, FTP, TFTP, web, etc., that you may have.
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG6616 itself) in the
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for
mail, FTP, TFTP, web, etc., that you may have.
12.3.2 LAN TCP/IP
The NBG6616 has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.
systems that support DHCP client capability.
12.3.3 IP Alias
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The NBG6616 supports three logical LAN interfaces via its single physical
Ethernet interface with the NBG6616 itself as the gateway for each LAN network.
Ethernet interface. The NBG6616 supports three logical LAN interfaces via its single physical
Ethernet interface with the NBG6616 itself as the gateway for each LAN network.
12.4 LAN IP Screen
Use this screen to change the IP address for your NBG6616. Click Network > LAN > IP.