ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation
Chapter 12 LAN
NBG6616 User’s Guide
110
12.6 IPv6 LAN Screen
Use this screen to configure the IPv6 address for your NBG6616 on the LAN. Click Network > LAN
> IPv6 LAN.
> IPv6 LAN.
Figure 71
Network > LAN > IPv6 LAN
The following table describes the labels on this screen.
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your NBG6616
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG6616.
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG6616.
Apply
Click Apply to save your changes back to the NBG6616.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 44
Network > LAN > IP Alias (continued)
LABEL
DESCRIPTION
Table 45
Network > LAN > IPv6 LAN
LABEL
DESCRIPTION
Enable DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The NBG6616 will obtain an IPv6
prefix from the ISP or a connected uplink router for the LAN.
prefix from the ISP or a connected uplink router for the LAN.
Static IP Address
Select this option to manually enter an IPv6 address if you want to use a static IP
address.
address.
LAN IPv6 Address
Enter the IPv6 address for the NBG6616 on the LAN.
Apply
Click Apply to save your changes with the NBG6616.
Cancel
Click Cancel to begin configuring this screen afresh.