ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

 Chapter 6 Router Mode

NBG6616 User’s Guide

Use the sub-menus on the navigation panel to configure NBG6616 features. 

Firewall

This shows whether the firewall is enabled or not.

Summary

Packet Statistics

Click Details... to go to the Monitor > Packet Statistics screen (

). 

Use this screen to view port status and packet specific statistics.

WLAN 2.4G Station 

Status

Click Details... to go to the Monitor > WLAN 2.4G Station Status screen (

). Use this screen to view the wireless stations that are currently associated to the 

NBG6616’s 2.4GHz wireless LAN.

WLAN 5G Station Status

Click Details... to go to the Monitor > WLAN 5G Station Status screen (

). Use this screen to view the wireless stations that are currently associated to the 

NBG6616’s 5GHz wireless LAN.

System Status

Item

This column shows the type of data the NBG6616 is recording.

Data

This column shows the actual data recorded by the NBG6616.

System Up Time

This is the total time the NBG6616 has been on.

Current Date/Time

This field displays your NBG6616’s present

 

date and time.

System Resource

- CPU Usage

This displays what percentage of the NBG6616’s processing ability is currently used. When 
this percentage is close to 100%, the NBG6616 is running at full load, and the throughput is 
not going to improve anymore. If you want some applications to have more throughput, you 
should turn off other applications (for example, using bandwidth management.)

- Memory Usage

This shows what percentage of the heap memory the NBG6616 is using. 

Interface Status

Interface

This displays the NBG6616 port types. The port types are: WAN, LAN and WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or 
connected).

For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or 
Down when the 2.4G/5G WLAN is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A when the line is 
disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet 
encapsulation. This field displays N/A when the line is disconnected.

For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.

Status Screen: Router Mode (continued)