ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

NBG6616 User’s Guide

This chapter provides tutorials for setting up your NBG6616.

•

•

•

This section gives you an example of how to set up wireless network using WPS. This example uses 
the NBG6616 as the AP and NWD210N as the wireless client which connects to a notebook. 

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter 

or PCI card).

There are two WPS methods for creating a secure connection via the web configurator or utility. 
This tutorial shows you how to do both.

• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a 

. This is the easier method.

• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN 

(Personal Identification Number) in the NBG6616’s interface. See 

. This 

is the more secure method, since one device can authenticate the other.

Make sure that your NBG6616 is turned on. Make sure the WIFI button (at the back panel of the 
NBG6616) is pushed in, and that the device is placed within range of your notebook. 

Make sure that you have installed the wireless client (this example uses the NWD210N) driver and 
utility in your notebook.

In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or 
WPS button)

Log into NBG6616’s Web Configurator and press the Push Button in the Configuration > 
Network > Wireless LAN 2.4G > WPS Station screen.