ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation

 Chapter 9 Quality of Service (QoS)

P-660HN-Tx(A) v2 User’s Guide

Use this screen to give priority to traffic for specific games. Click Network Setting > QoS > Game 
List to open the screen as shown next.

Network Setting > QoS > Game List

Type Of 

Service Mark

Select a type of service to re-assign the priority level to matched traffic.

Available options are: Normal service, Minimize delay, Maximize throughput, 
Maximize reliability and Minimize monetary cost.

DSCP 

Mark(0~63)

This field is available only when you select IP in the Ether Type field.

If you select Mark, enter a DSCP value with which the ADSL Router replaces the DSCP 
field in the packets.

If you select Unchange, the ADSL Router keep the DSCP field in the packets.

802.1Q Tag

If you select Remark, select a priority level (in the Ethernet Priority field) and enter a 

VLAN ID number (in the VLAN ID field) with which the ADSL Router replaces the IEEE 
802.1p priority field and VLAN ID of the frames.

If you select Remove, the ADSL Router deletes the VLAN ID of the frames before 
forwarding them out.

If you select Add, the ADSL Router treat all matched traffic untagged and add a second 
priority level and VLAN ID that you specify in the Ethernet Priority and VLAN ID fields.

If you select Same, the ADSL Router keep the Ethernet Priority and VLAN ID in the 
packets.

To configure the Ethernet Priority, you can either select a priority number in the first 
drop-down list box (7 is the highest and 0 is the lowest priority) or select an application 
from the second drop-down list box which automatically maps to the corresponding 
priority number. (Key Net Traffic: 7; Voice: 6; Video: 5;IGMP: 4; Key Data: 3)

OK

Click OK to save your changes.

Cancel

Click Cancel to exit this screen without saving.

QoS > Class Setup Add/Edit (continued)