ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation

 Chapter 13 Filters

P-660HN-Tx(A) v2 User’s Guide

Use this screen to create and apply IPv6 filters. Click Security > Filter > IPv6/MAC Filter. The 
screen appears as shown.

Port Number

Enter the source port of the packets that you wish to filter. The range of this 
field is 0 to 65535. This field is ignored if it is 0.

Destination IP Address

Enter the destination IP address of the packets you wish to filter. This field is 
ignored if it is 0.0.0.0.

Subnet Mask

Enter the IP subnet mask for the destination IP address.

Port Number

Enter the destination port of the packets that you wish to filter. The range of 
this field is 0 to 65535. This field is ignored if it is 0.

Protocol

Select ICMP, TCP or UDP for the upper layer protocol.

IP / MAC Filter Listing

IP / MAC Filter Rule Index

Select the index number of the filter set from the drop-down list box.

#

This is the index number of the rule in a filter set.

Active

This field shows whether the rule is activated.

Interface

This is the interface that the filter set applies to.

Direction

The filter set applies to this traffic direction.

Src IP/Mask

This is the source IP address and subnet mask when you select IP as the rule 
type.

Dest IP/Mask

This is the destination IP address and subnet mask.

Mac Address

This is the MAC address of the packets being filtered.

Src Port

This is the source port number.

Dest Port

This is the destination port number.

Protocol

This is the upper layer protocol.

Apply

Click this to apply your changes.

Delete

Click this to remove the filter rule.

Cancel

Click this to restore your previously saved settings.

Security > Filter > IP/MAC Filter (continued)