ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation
Chapter 24 Remote Management
P-660HN-Tx(A) v2 User’s Guide
220
Figure 114
Maintenance > RemoteMGMT > SSH
The following table describes the labels in this screen.
24.8.1 SSH Example
This section shows an example using a graphical interface SSH client program to remotely access
the ZyXEL device. The configuration and connection steps are similar for most SSH client programs.
Refer to your SSH client program user’s guide.
the ZyXEL device. The configuration and connection steps are similar for most SSH client programs.
Refer to your SSH client program user’s guide.
1
Enter the IP address and port number. Select SSH.
Table 85
Maintenance > RemoteMGMT > SSH
LABEL
DESCRIPTION
Server Port
This displays the service port number for accessing the ADSL Router. If the number is
grayed out, it is not editable.
grayed out, it is not editable.
Server Access
Select the interface(s) through which a computer may access the ADSL Router using this
service.
service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in Maintenance > User Account). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule. See
WAN, you will need to configure a WAN to Router firewall rule. See
Section 4.8 on
page 60
for information on configuring firewall rules.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to communicate with the ADSL
Router using this service.
Router using this service.
Select All to allow any computer to access the ADSL Router using this service.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the ADSL Router using this service.
specify to access the ADSL Router using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.