ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation
Chapter 2 Introducing the Web Configurator
P-660HN-Tx(A) v2 User’s Guide
24
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
document.
After you click System Info on the Connection Status screen, the System Info screen is
displayed. See
displayed. See
for more information about the System Info screen.
If you click LAN Device on the System Info screen, the Connection Status screen appears. See
for more information about the Connection Status screen.
If you click Virtual Device on the System Info screen, a visual graphic appears, showing the
connection status of the ADSL Router’s ports. The connected ports are in color and disconnected
ports are gray.
connection status of the ADSL Router’s ports. The connected ports are in color and disconnected
ports are gray.
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ADSL Router features.
The following table describes each menu item.
The following table describes each menu item.
Table 1
Navigation Panel Summary
LINK
TAB
FUNCTION
Connection Status
This screen shows the network status of the ADSL Router and
computers/devices connected to it.
computers/devices connected to it.
Network Setting
Broadband
Internet
Connection
Connection
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
assignment, DNS servers and other advanced properties.
More Connections
Use this screen to configure additional WAN connections.
Wireless
General
Use this screen to turn the wireless connection on or off, specify
the SSID(s) and configure the wireless LAN settings and WLAN
authentication/security settings.
the SSID(s) and configure the wireless LAN settings and WLAN
authentication/security settings.
More AP
Use this screen to configure multiple BSSs on the ADSL Router.
MAC
Authentication
Authentication
Use this screen to block or allow wireless traffic from wireless
devices of certain SSIDs and MAC addresses to the ADSL Router.
devices of certain SSIDs and MAC addresses to the ADSL Router.
WPS
Use this screen to use WPS (Wi-Fi Protected Setup) to establish a
wireless connection.
wireless connection.
WDS
Use this screen to set up Wireless Distribution System (WDS) links
to other access points.
to other access points.
WMM
Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Scheduling
Use this screen to configure when the ADSL Router enables or
disables the wireless LAN.
disables the wireless LAN.
Advanced
Use this screen to configure advanced wireless settings such as
output power.
output power.