ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation

 Chapter 5 Broadband

P-660HN-Tx(A) v2 User’s Guide

Use this screen to edit your ADSL Router's advanced WAN settings. Click the Advanced Setup 
button in the Internet Connection screen. The screen appears as shown.

Primary DNS 

Server

Enter the first DNS server address assigned by the ISP.

Secondary DNS 

Server

Enter the second DNS server address assigned by the ISP.

IPv6 Address

Obtain an IP Address 
Automatically

Select this option if you want to have the ADSL Router use the IPv6 prefix from the 
connected router’s Router Advertisement (RA) to generate an IPv6 address. 

DHCP IPv6

Select DHCP if you want to obtain an IPv6 address from a DHCPv6 server.

The IP address assigned by a DHCPv6 server has priority over the IP address 
automatically generated by the ADSL Router using the IPv6 prefix from an RA.

Select SLAAC (Stateless address autoconfiguration) to have the ADSL Router use the 
prefix to automatically generate a unique IP address that does not need to be 
maintained by a DHCP server.

Selelct Auto to have the ADSL Router ??

DHCP PD 

Select Enable to use DHCP PD (Prefix Delegation) to allow the ADSL Router to pass 
the IPv6 prefix information to its LAN hosts. The hosts can then use the prefix to 
generate their IPv6 addresses.

WAN Identifier Type

Select Manual to manually enter a WAN Identifier as the interface ID to identify the 
WAN interface. The WAN Identifier is appended to the IPv6 address prefix to create 
the routable global IPv6 address. Select EUI64 to use the EUI-64 format to generate 
an interface ID from the MAC address of the WAN interface.

WAN Identifier

If you selected Manual, enter the WAN Identifier in this field. The WAN identifier 
should be unique and 64 bits in hexadecimal form. Every 16 bit block should be 
separated by a colon as in XXXX:XXXX:XXXX:XXXX where X is a hexadecimal 
character. Blocks of zeros can be represented with double colons as in 
XXXX:XXXX::XXXX.

Connection (PPPoA and PPPoE encapsulation only)

Keep Alive

Select Keep Alive when you want your connection up all the time. The ADSL Router 
will try to bring up the connection automatically if it is disconnected.

Apply

Click this to save your changes. 

Cancel

Click this to restore your previously saved settings.

Advanced Setup

Click this to display the Advanced WAN Setup screen and edit more details of your 
WAN setup. Click this button again to display less fields in this screen.

Network Setting > Broadband > Internet Connection (continued)