ZyXEL Communications Corporation P660HNT1AV2 Manuel D’Utilisation

P-660HN-Tx(A) v2 User’s Guide

This chapter describes how to perform tasks related to setting up and optimizing your wireless 
network, including the following.

• Turning the wireless connection on or off.
• Configuring a name, wireless channel and security for the network.
• Using WiFi Protected Setup (WPS) to configure your wireless network.
• Setting up multiple wireless networks.
• Using a MAC (Media Access Control) address filter to restrict access to the wireless network.
• Performing other performance-related wireless tasks.

This section describes the ADSL Router’s Network Setting > Wireless screens. Use these screens 
to set up your ADSL Router’s wireless connection.

• Use  the  General screen to enable the Wireless LAN, enter the SSID and select the wireless 

security mode (

).

• Use  the  More AP screen (see 

) to set up multiple wireless networks on 

your ADSL Router.

• Use  the  MAC Authentication screen to allow or deny wireless clients based on their MAC 

addresses from connecting to the ADSL Router (

).

• Use  the  WPS screen (see 

) to enable or disable WPS, generate a security 

PIN (Personal Identification Number) and see information about the ADSL Router’s WPS status.

• Use  the  WDS screen (see 

) to set up a Wireless Distribution System, in 

which the ADSL Router acts as a bridge with other ZyXEL access points.

• Use  the  WMM screen to enable Wi-Fi MultiMedia (WMM) to ensure quality of service in wireless 

networks for multimedia applications (

). 

• Use  the  Scheduling screen (see 

) to configure the dates/times to enable 

or disable the wireless LAN.

• Use  the  Advanced screen to configure wireless advanced features (

You don’t necessarily need to use all these screens to set up your wireless connection. For example, 
you may just want to set up a network name, a wireless radio channel and security in the General 
screen.