ZyXEL Communications Corporation P873HNUP51B Manuel D’Utilisation

Chapter 7 Wireless

P-873HNUP-51B User’s Guide

Use this screen to configure advanced wireless settings. Click Network Settings > Wireless > 
Others. The screen appears as shown.

See 

Section 7.7.2 on page 103

 for detailed definitions of the terms listed in this screen.

Figure 31   Network Settings > Wireless > Others

The following table describes the labels in this screen. 

Release 
Configuration

The default WPS status is configured.

Click this button to remove all configured wireless and wireless security settings 
for WPS connections on the ZyXEL Device.

Generate New 
PIN Number

The PIN (Personal Identification Number) of the ZyXEL Device is shown here. 
Enter this PIN in the configuration utility of the device you want to connect to 
using WPS.

The PIN is not necessary when you use WPS push-button method.

Click the Generate New PIN Number button to have the ZyXEL Device create 
a new PIN. 

Apply

Click Apply to save your changes.

Cancel

Click Cancel to restore your previously saved settings.

Table 19   Network Settings > Wireless > WPS (continued)

Table 20   Network Settings > Wireless > Others

RTS/CTS 
Threshold

Data with its frame size larger than this value will perform the RTS (Request To 
Send)/CTS (Clear To Send) handshake. 

Enter a value between 0 and 2347. 

Fragmentation 
Threshold

This is the maximum data fragment size that can be sent. Enter a value between 
256 and 2346. 

Number of 
Wireless 
Stations Allowed 

Specify the maximum number of the wireless stations that may connect to the 
ZyXEL Device.