ZyXEL Communications Corporation P873HNUP51B Manuel D’Utilisation
Chapter 8 Home Networking
P-873HNUP-51B User’s Guide
131
The following table describes the fields in this screen.
8.10
The
LAN VLAN Screen
Click Network Settings > Home Networking > LAN VLAN to open this screen. Use this screen
to control the VLAN ID and IEEE 802.1p priority tags of traffic sent out through individual LAN
ports.
to control the VLAN ID and IEEE 802.1p priority tags of traffic sent out through individual LAN
ports.
Figure 46 Network Settings > Home Networking > LAN VLAN
The following table describes the fields in this screen.
Table 29 Network Settings > Home Networking > 5th Ethernet Port
LABEL
DESCRIPTION
State
Select Enable to use the Ethernet WAN port as a LAN port on the ZyXEL Device.
Apply
Click Apply to save your changes back to the ZyXEL Device.
Cancel
Click Cancel to exit this screen without saving.
Table 30 Network Settings > Home Networking > LAN VLAN
LABEL
DESCRIPTION
Lan Port
These represent the ZyXEL Device’s LAN ports.
Tag Operation
Select what you want the ZyXEL Device to do to the IEEE 802.1q VLAN ID and
priority tags of downstream traffic before sending it out through this LAN port.
priority tags of downstream traffic before sending it out through this LAN port.
•
Unchange - Don’t do anything to the traffic’s VLAN ID and priority tags.
•
Add - Add VLAN ID and priority tags to untagged traffic.
•
Remove - Delete one tag from tagged traffic. If the frame has double tags,
this removes the outer tag. This does not affect untagged traffic.
this removes the outer tag. This does not affect untagged traffic.
•
Remark - Change the value of the outer VLAN ID and priority tags.
802.1P Mark
Use this option to set what to do for the IEEE 802.1p priority tags when you add
or remark the tags for a LAN port’s downstream traffic. Either select Unchange
to not modify the traffic’s priority tags or select an priority from 0 to 7 to use. The
larger the number, the higher the priority.
or remark the tags for a LAN port’s downstream traffic. Either select Unchange
to not modify the traffic’s priority tags or select an priority from 0 to 7 to use. The
larger the number, the higher the priority.