ZyXEL Communications Corporation P873HNUP51B Manuel D’Utilisation

Chapter 9 Static Routing

P-873HNUP-51B User’s Guide

Use this screen to view and configure the static route rules on the ZyXEL Device. Click Network
Settings > Routing > Static Route to open the following screen.

Figure 49   Network Settings > Routing > Static Route

The following table describes the labels in this screen. 

Table 31   Network Settings > Routing > Static Route

Add new Static 
Route Entry

Click this to configure a new static route.

#

This is the index number of the entry.

Status

This field displays whether the static route is active or not. A yellow bulb signifies 
that this route is active. A gray bulb signifies that this route is not active.

Name

This is the name that describes or identifies this route. 

Destination IP

This parameter specifies the IP network address of the final destination. Routing is 
always based on network number. 

Subnet Mask

This parameter specifies the IP network subnet mask of the final destination.

Gateway

This is the IP address of the gateway. The gateway is a router or switch on the 
same network segment as the device's LAN or WAN port. The gateway helps 
forward packets to their destinations.

Modify

Click the Edit icon to edit the static route on the ZyXEL Device.

Click the Delete icon to remove a static route from the ZyXEL Device. A window 
displays asking you to confirm that you want to delete the route.