ZyXEL Communications Corporation P873HNUP51B Manuel D’Utilisation
Chapter 15 Firewall
P-873HNUP-51B User’s Guide
201
15.4.1 Add/Edit an ACL Rule
Click Add New ACL Rule or the Edit icon next to an existing ACL rule in the Access Control
screen. The following screen displays.
screen. The following screen displays.
Figure 94 Security Settings > Firewall > Access Control > Add/Edit
The following table describes the labels in this screen.
Direction
This displays the direction of traffic to which this rule applies.
Action
This field displays whether the rule silently discards packets (DROP), discards
packets and sends a TCP reset packet or an ICMP destination-unreachable
message to the sender (REJECT) or allows the passage of packets (ACCEPT).
packets and sends a TCP reset packet or an ICMP destination-unreachable
message to the sender (REJECT) or allows the passage of packets (ACCEPT).
Modify
Click the Edit icon to edit the rule.
Click the Delete icon to delete an existing rule. Note that subsequent rules move
up by one when you take this action.
up by one when you take this action.
Apply
Click Apply to save the DoS Protection settings.
Cancel
Click Cancel to restore your previously saved settings.
Table 70 Security Settings > Firewall > Access Control (continued)
LABEL
DESCRIPTION
Table 71 Security Settings > Firewall > Access Control > Add/Edit
LABEL
DESCRIPTION
General
Filter Name
Enter a descriptive name of up to 16 alphanumeric characters, not including
spaces, underscores, and dashes.
spaces, underscores, and dashes.
You must enter the filter name to add an ACL rule. This field is read-only if you
are editing the ACL rule.
are editing the ACL rule.