ZyXEL Communications Corporation PLA4231 Manuel D’Utilisation

Chapter 13 Maintenance

PLA4231 User’s Guide

The following table describes the labels in this screen.

It is strongly recommended that you change your PLA4231's password.  

If you forget your PLA4231's password (or IP address), you will need to reset the device. See 

 for details

Click Maintenance > Password.

Maintenance > Password 

The following table describes the labels in this screen.

Use this screen to configure the PLA4231’s time based on your local time zone. To change your 
PLA4231’s time and date, click Maintenance > Time. The screen appears as shown. 

Maintenance > General

Administrator 
Inactivity Timer

Type how many minutes a management session can be left idle before the session times 
out. The default is 5 minutes. After it times out you have to log in with your password 
again. Very long idle timeouts may have security risks. A value of "0" means a 
management session never times out, no matter how long it has been left idle (not 
recommended).

Apply

Click Apply to save your changes back to the PLA4231.

Cancel

Click Cancel to reload the previous configuration for this screen.

Maintenance > Password

Old Password

Type the default password or the existing password you use to access the system in 
this field.

New Password

Type your new system password (up to 30 characters). Note that as you type a 
password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Type the new password again in this field.

Apply

Click Apply to save your changes back to the PLA4231.

Cancel

Click Cancel to reload the previous configuration for this screen.