ZyXEL Communications Corporation PRESTIGE310S Manuel D’Utilisation

The first selection, System Status, gives you information on the version of your system firmware and the
status and statistics of the ports, as shown in the figure below. System Status is a tool that can be used to
monitor your Prestige. Specifically, it gives you information on your system firmware version, number of
packets sent and number of packets received.
To get to the System Status:
Step 1. 

Enter number 24 to go to Menu 24 - System Maintenance.

In this menu, enter number 1 to open System Maintenance - Status.

There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the
WAN (PPTP/PPPoE) connection, 9 resets the counters and [Esc] takes you back to the previous
screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be
noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

Menu 24.1 -- System Maintenance – Status

1:39:06

Thus. Jan. 1. 1970

Port

WAN
LAN

Status
Down
Down

TxPkts

      1
      0

RxPkts

0
0

Cols

0
0

Tx B/s

0
0

Rx B/s

0
0

Up Time
0:00:00
0:00:00

Port:

WAN
LAN

Ethernet Address
00:a0:c5:21:8c:a3
00:a0:c5:21:8c:a2

IP Address
 0.0.0.0
192.168.1.1

IP Mask
0.0.0.0

255.255.255.0

DHCP

Client
Server

System up Time:    1:08:22

Name: P310.www.zyxel.com
Routing: IP
ZyNOS F/W Version: V.251 : 2/17/2000

Press Command:

COMMANDS: 1-Drop WAN 9-Reset Counters   ESC-Exit