ZyXEL Communications Corporation V630 Manuel D’Utilisation
V630 User’s Guide
137
C
H A P T E R
1 5
Auto Provision
Use the Auto Provision screen to set the V630 to use an auto-provisioning server.
15.1 Auto Provision Screen
Click Auto Provision to open the following screen.
If there is an auto-provisioning server on the network, use this screen to configure the V630 to
use it. When auto-provisioning is used, the V630 downloads SIP settings automatically from
the auto-provisioning server, meaning you do not have to input them manually.
use it. When auto-provisioning is used, the V630 downloads SIP settings automatically from
the auto-provisioning server, meaning you do not have to input them manually.
Figure 139 Auto Provision
The following table describes the labels in this screen.
Table 106 Auto Provision
LABEL
DESCRIPTION
Active
Select this to set the V630 to request and receive auto-provisioning files.
Server Address
Enter the auto provisioning server’s IP address.
Port
Enter the auto-provisioning server’s port number.
Retry Timer Interval
Select this to see or edit how long the V630 waits, if it requests an auto-
provisioning file but does not receive one, before requesting the file again.
provisioning file but does not receive one, before requesting the file again.
Expire Timer Interval
Select this to see or edit how long the V630 waits after it successfully
receives an auto-provisioning file before it requests another.
receives an auto-provisioning file before it requests another.
Select
Press this to choose the highlighted entry in the menu.