ZyXEL Communications Corporation VMG1312T10C Manuel D’Utilisation
VMG1312-T10C User’s Guide
115
C
H A P T E R
8
Static Route
8.1 Overview
The Device usually uses the default gateway to route outbound traffic from computers on the LAN
to the Internet. To have the Device send data to devices not reachable through the default gateway,
use static routes.
to the Internet. To have the Device send data to devices not reachable through the default gateway,
use static routes.
For example, the next figure shows a computer (A) connected to the Device’s LAN interface. The
Device routes most traffic from A to the Internet through the Device’s default gateway (R1). You
create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Device routes most traffic from A to the Internet through the Device’s default gateway (R1). You
create one static route to connect to services offered by your ISP behind router R2. You create
another static route to communicate with a separate network behind a router R3 connected to the
LAN.
Figure 74
Example of Static Routing Topology
8.1.1 What You Can Do in this Chapter
• Use the Static Route screens (
) to view and configure IP static routes
on the Device.
• Use the IPv6 Static Route screens (
) to view and configure IPv6 static
routes on the Device.
WAN
R1
R2
A
R3
LAN