ZyXEL Communications Corporation VSG1435B101 Manuel D’Utilisation
Chapter 8 Home Networking
VSG1435-B101 Series User’s Guide
137
If you click Add new static lease in the Static DHCP screen or the Edit icon next
to a static DHCP entry, the following screen displays.
to a static DHCP entry, the following screen displays.
Figure 47 Static DHCP: Add/Edit
The following table describes the labels in this screen.
8.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that
uses TCP/IP for simple peer-to-peer network connectivity between devices. A
UPnP device can dynamically join a network, obtain an IP address, convey its
capabilities and learn about other devices on the network. In turn, a device can
leave a network smoothly and automatically when it is no longer in use.
uses TCP/IP for simple peer-to-peer network connectivity between devices. A
UPnP device can dynamically join a network, obtain an IP address, convey its
capabilities and learn about other devices on the network. In turn, a device can
leave a network smoothly and automatically when it is no longer in use.
See
page 132
for more information on UPnP.
Table 26 Static DHCP: Add/Edit
LABEL
DESCRIPTION
Active
This field displays whether the client is connected to the ZyXEL Device.
MAC Address
Enter the MAC address of a computer on your LAN.
IP Address
Enter the IP address that you want to assign to the computer on your
LAN with the MAC address that you will also specify.
LAN with the MAC address that you will also specify.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.