ZyXEL Communications Corporation VSG1435B101 Manuel D’Utilisation
Chapter 11 Policy Forwarding
VSG1435-B101 Series User’s Guide
176
11.2.1 Add/Edit Policy Forwarding
Click Add new Policy Forward Rule in the Policy Forwarding screen or click
the Edit icon next to a policy. Use this screen to configure the required
information for a policy route.
the Edit icon next to a policy. Use this screen to configure the required
information for a policy route.
Figure 62 Policy Forwarding: Add/Edit
The following table describes the labels in this screen.
Source IP
This is the source IP address.
Source
Subnet Mask
Subnet Mask
This is the source subnet mask address.
Protocol
This is the transport layer protocol.
SourcePort
This is the source port number.
Source MAC
This is the source MAC address.
WAN
This is the WAN interface through which the traffic is routed.
Modify
Click the Edit icon to edit this policy.
Click the Delete icon to delete an existing policy.
Table 40 Network Settings > Routing > Policy Forwarding
LABEL
DESCRIPTION
Table 41 Policy Forwarding: Add/Edit
LABEL
DESCRIPTION
Policy Name
Enter a descriptive name of up to 8 printable English keyboard
characters, not including spaces.
characters, not including spaces.
Source IP
Address
Address
Enter the source IP address.
Source Subnet
Mask
Mask
Enter the source subnet mask address.
Protocol
Select the transport layer protocol (TCP or UDP).
Source Port
Enter the source port number.
Source Mac
Enter the source MAC address.