ZyXEL Communications Corporation VSG1435B101 Manuel D’Utilisation
Chapter 12 Network Address Translation (NAT)
VSG1435-B101 Series User’s Guide
187
12.4.1 Add/Edit Port Triggering Rule
This screen lets you create new port triggering rules. Click Add new rule in the
Port Triggering screen or click a rule’s Edit icon to open the following screen.
Port Triggering screen or click a rule’s Edit icon to open the following screen.
Figure 70 Port Triggering: Add/Edit
WAN Interface
This field shows the WAN interface through which the service is
forwarded.
forwarded.
Trigger Port
The trigger port is a port (or a range of ports) that causes (or triggers)
the ZyXEL Device to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
the ZyXEL Device to record the IP address of the LAN computer that sent
the traffic to a server on the WAN.
Start
This is the first port number that identifies a service.
End
This is the last port number that identifies a service.
Trigger Proto.
This is the trigger transport layer protocol.
Open
The open port is a port (or a range of ports) that a server on the WAN
uses when it sends out a particular service. The ZyXEL Device forwards
the traffic with this port (or range of ports) to the client computer on the
LAN that requested the service.
uses when it sends out a particular service. The ZyXEL Device forwards
the traffic with this port (or range of ports) to the client computer on the
LAN that requested the service.
Start
This is the first port number that identifies a service.
End
This is the last port number that identifies a service.
Open Proto.
This is the open transport layer protocol.
Modify
Click the Edit icon to edit this rule.
Click the Delete icon to delete an existing rule.
Table 46 Network Settings > NAT > Port Triggering (continued)
LABEL
DESCRIPTION