ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
NWA5000 / WAC6500 Series User’s Guide
180
C
H A P T E R
1 9
Troubleshooting
19.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
problems are divided into the following categories.
•
•
•
•
•
19.2 Power, Hardware Connections, and LED
The NWA/WAC does not turn on. The LED is not on.
1
Make sure you are using the power adaptor included with the NWA/WAC or a PoE power injector.
2
Make sure the power adaptor or PoE power injector is connected to the NWA/WAC and plugged in to
an appropriate power source. Make sure the power source is turned on.
an appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or PoE power injector.
4
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
5
If none of these steps work, you may have faulty hardware and should contact your NWA/WAC
vendor.
vendor.
The LED does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
.
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.