ZyXEL Communications Corporation WAP5705 Manuel D’Utilisation

 Chapter 5 Client Mode

WAP5705 User’s Guide

Use this screen to scan for and connect to a wireless network automatically. Go to Configuration > 
Wireless LAN > Site Survey to open the following screen.

Client Mode: WLAN > Site Survey 

The following table describes the labels in this screen. 

Security

Security Mode

Select WPA-PSK or WPA2-PSK to add strong security on this wireless network.

Encryption Type

Select the type of wireless encryption employed by the access point to which you want to 
connect. 

Pre-Shared Key 

WPA-PSK or WPA2-PSK uses a simple common password for authentication.

Type the pre-shared key employed by the access point to which you want to connect. 

Apply

Click Apply to save your changes back to the WAP5705.

Back

Click Back to go back to the previous screen.

Client Mode: WLAN > Profile: WPA-PSK/WPA2-PSK

Client Mode: WLAN > Site Survey

Station Site Survey

#

Select a wireless device and click Add Profile to open a configuration screen where you 
can add the selected wireless device to a profile and then enable it.

SSID

This displays the SSID of the wireless device.

 indicates the wireless device is added to an activated profile and the WAP5705 is 
connecting to it.

BSSID

This displays the MAC address of the wireless device.

Signal Strength

This displays the strength of the wireless signal. The signal strength mainly depends on the 
antenna output power and the distance between your WAP5705 and this device.

Channel

This displays the channel number used by this wireless device. 

Encryption

This displays the data encryption method used by this wireless device.

Authentication

This displays the authentication method used by this wireless device.

Network Type

This displays the network type (Infrastructure or Ad Hoc) of this wireless device.