ZyXEL Communications Corporation WAP5705 Manuel D’Utilisation
WAP5705 User’s Guide
99
C
H A P T E R
1 2
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
problems are divided into the following categories.
•
•
•
•
12.1 Power, Hardware Connections, and LEDs
The WAP5705 does not turn on. None of the LEDs turn on.
1
Make sure you are using the power adaptor or cord included with the WAP5705.
2
Make sure the power adaptor or cord is connected to the WAP5705 and plugged in to an
appropriate power source. Make sure the power source is turned on.
appropriate power source. Make sure the power source is turned on.
3
Disconnect and re-connect the power adaptor or cord to the WAP5705.
4
If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1
Make sure you understand the normal behavior of the LED. See
.
2
Check the hardware connections. See the Quick Start Guide.
3
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4
Disconnect and re-connect the power adaptor to the WAP5705.
5
If the problem continues, contact the vendor.