ZyXEL Communications Corporation WAP5805 Manuel D’Utilisation
Chapter 5 Access Point Expert Mode
WAP5805 User’s Guide
33
5.3.1 Configuring your WLAN, LAN and Maintenance Settings
and
Chapter 10 on page 79
for information on the configuring your
wireless network and LAN settings.
for information on configuring your Maintenance settings.
5.4 Setting your WAP5805 to AP Mode
1
To set your WAP5805 to AP mode, see
2
Connect your computer to the LAN port of the WAP5805.
3
The default IP address of the WAP5805 in AP mode is “192.168.1.2”. In this case, your computer
must have an IP address in the range between “192.168.1.3” and “192.168.1.254”, except for
“192.168.1.10” since it is reserved for CL.
must have an IP address in the range between “192.168.1.3” and “192.168.1.254”, except for
“192.168.1.10” since it is reserved for CL.
4
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
5
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
type “http://192.168.1.2” as the web address in your web browser.
6
Enter “1234” (default) as the password and click Login.
7
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
8
The Easy mode appears. Click Expert Mode in the navigation panel.