ZyXEL Communications Corporation WAP6806 Manuel D’Utilisation

 Chapter 12 Wireless LAN

WAP6806 User’s Guide

Use this screen to configure advanced wireless LAN parameters.

Click Configuration > Network > Wireless LAN (2.4G/5G) > Advanced. The screen appears 
as shown.

802.11 Mode

Choose from the following options for 2.4G:

•

Select 802.11b/g Mixed mode to allow IEEE802.11b and IEEE 802.11g compliant 

WLAN devices to associate with the WAP6806. The transmission rate of yourWAP6806 

might be reduced.

•

Select 802.11b Only mode to allow IEEE802.11b compliant WLAN devices to associate 

with the WAP6806.

•

Select 802.11g Only mode to allow IEEE802.11g compliant WLAN devices to associate 

with the WAP6806.

•

Select 802.11b/g/n Mixed mode to allow IEEE802.11b, IEEE802.11g and IEEE 

802.11n compliant WLAN devices to associate with the WAP6806. The transmission rate 

of your WAP6806 might be reduced.

•

Select 802.11n Only mode to allow IEEE802.11n compliant WLAN devices to associate 

with the WAP6806.

•

Select 802.11g/n Mixed mode to allow IEEE802.11g and IEEE 802.11n compliant 

WLAN devices to associate with the WAP6806. The transmission rate of yourWAP6806 

might be reduced.

Choose from the following options for 5G:

•

Select 802.11a/n Mixed mode to allow IEEE802.11a and IEEE 802.11n compliant 

WLAN devices to associate with the WAP6806. 

•

Select 802.11a/n/ac Mixed mode to allow IEEE802.11a, IEEE 802.11n and IEEE 

802.11ac compliant WLAN devices to associate with the WAP6806.

Channel

Use this field to select the channel number used by this wireless device.

SSID

The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is 
associated. Enter a descriptive name (up to 32 printable characters found on a typical 
English language keyboard) for the wireless LAN.

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a wireless client 
cannot obtain the SSID through scanning using a site survey tool.

Note: Hise SSID will disable WPS automatically after you click Confirm.

AP 

Isolation

AP Isolation is to prevent wireless clients from communicating directly with each other 
through the WAP6806.

Select this check box to enable this function.

HT (High Throughput) Physical Mode (for WLAN 2.4G) 

Bandwidth

Select the channel bandwidth you want to use for your wireless network.

It is recommended that you select 20/40 MHz. Select 20 MHz if you want you lessen radio 
interference with other wireless devices in your neighborhood.

VHT (Very High Throughput) Option (for WLAN 5G)

VHT Bandwidth Select the channel bandwidth you want to use for your wireless network.

Confirm

Click Confirm to save your changes.

Reset

Click Reset to reload the previous configuration for this screen.

Network > Wireless LAN (2.4G/5G) > General (continued)