ZyXEL Communications Corporation WAP6806 Manuel D’Utilisation
Chapter 12 Wireless LAN
WAP6806 User’s Guide
66
Figure 51
Configuration > Network > Wireless LAN (2.4G/5G) > Advanced
The following table describes the labels in this screen.
12.6 Security
Use this screen to select the wireless security mode. Click Configuration > Network > Wireless
LAN (2.4G/5G) > Security to open the Security screen. The screen varies depending on what
you select in the Encryption Type.
LAN (2.4G/5G) > Security to open the Security screen. The screen varies depending on what
you select in the Encryption Type.
Table 28
Configuration > Network > Wireless LAN (2.4G/5G) > Advanced
LABEL
DESCRIPTION
Wireless Advanced Setup
Fragmentation
Threshold
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages.
It is the maximum data fragment size that can be sent. Enter an even number between
256 and 2346.
It is the maximum data fragment size that can be sent. Enter an even number between
256 and 2346.
RTS Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)
handshake.
handshake.
Enter a value between 1 and 2347.
Output Power (for
2.4G only)
2.4G only)
Set the output power of the WAP6806 in this field. If there is a high density of APs in an
area, decrease the output power of the WAP6806 to reduce interference with other APs.
area, decrease the output power of the WAP6806 to reduce interference with other APs.
High - 100%
Medium - 50%
Low - 25%
WMM (Wi-Fi Multimedia)
WMM Power Save
Select Enable or Disable to activate/inactivate the power save mechanism to save
power and fine-tune power consumption.
power and fine-tune power consumption.
Confirm
Click Confirm to save your changes.
Reset
Click Reset to reload the previous configuration for this screen.