ZyXEL Communications Corporation WRE6505 Manuel D’Utilisation

 Chapter 9 Wireless LAN

WRE6505 User’s Guide

Network > Wireless LAN (2.4G/5G) > AP Select (Repeater Mode) 

The following table describes the labels in this screen.

The MAC Filter screen allows you to specify which devices are allowed to access the WRE6505, 
while denying access to all unspecified devices. Every Ethernet device has a unique MAC (Media 
Access Control) address. The MAC address is assigned at the factory and consists of six pairs of 

Network > Wireless LAN (2.4G/5G) > AP Select (Repeater Mode)

Select

Use the radio button to select the wireless device to which you want to connect. 

SSID

This displays the Service Set IDentity of the wireless device. The SSID is a unique name 
that identifies a wireless network. All devices in a wireless network must use the same 
SSID.

MAC

This displays the MAC address of the wireless device.

Channel 

This displays the channel number used by this wireless device.

Mode

This displays which IEEE 802.11b/g/n wireless networking standards the wireless device 
supports.

Security Mode

This displays the type of security configured on the wireless device. When no is shown, no 
security is configured and you can connect to it without a password.

Strength

This displays the strength of the wireless signal. The signal strength mainly depends on 
the antenna output power and the distance between your WRE6505 and this device.

<

Click < to see the previous page of APs.

>

Click > to see the next page of APs.

Setup repeater 
manually

Select this to setup the AP manually.

SSID

If Setup repeater manually is selected, use this field to type the SSID of the AP. This is 
useful when the AP’s SSID is hidden.

Refresh

Click Refresh to search for available wireless devices within transmission range and 
update this table.

Next

Click Next to start the next step in the AP setup process.