ZyXEL Communications Corporation Z2FPM9582 Manuel D’Utilisation
1. Introduction
IEEE802.11b/g/n Wireless Network Mini PCI Express Card
is the perfect solution for your wireless network
applications based on
the IEEE 802.11b/g/n standard offering a data rate of 300Mbps in a wireless LAN environment.
Z2FPM9582
is designed for Access Point, Router, ATUR, Printer Server series, IP Camera series and
Internet Video Server gives
you wireless access the web and network resource without the wire. With Direct Spread Spectrum Signaling (DSSS) and
Orthogonal Frequency Division Multiplexing (OFDM), domain access control, and group security, the modules will safeguard all
your wireless data transmissions from your nosy neighbors.
Orthogonal Frequency Division Multiplexing (OFDM), domain access control, and group security, the modules will safeguard all
your wireless data transmissions from your nosy neighbors.
Z2FPM9582
allows you to take full advantage of your devices mobility with access to real-time
information and online services
anytime and anywhere.
2. Feature
. Complies with IEEE 802.11b/g/n Standard for Wireless LAN.
. Works with All Existing Network Infrastructures.
. Compatible with Wi-Fi Wireless Products and Services.
. Freedom to Roam While staying Connected.
. Delivers data rate up to 300 Mbps.
. Two UF-L Connectors for External Antenna .
. Lower Power Consumption.
3. Hardware Installation
The following sections in this chapter describe how to install
Z2FPM9582
Module.
3.1. Installation Overview
Z2FPM9582
wireless module is design for Access Point, Router, ATU-R, Printer Server series, IP Camera
series and Internet
Video Server only.
3.2. Safety Recommendations
The safety guidelines are as follows:
-Keep the board area clear and dust-free before, during, and after installation.
-Keep tools away from walk areas where you and others could fall over them.
-Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the board.
-Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
-Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
-Never attempt to lift an object that is too heavy for one person to handle.
3.3. Maintaining Safety with Electricity
Warning: Before working on a board or working near power supplies, unplug the power cord on AC units;
on DC units, disconnect the power at the circuit breaker
.
Follow these guidelines when working on equipment powered by electricity:
-Do not work alone if potentially hazardous conditions exist anywhere in your work space.
-Never assume that power is disconnected from a circuit; always check the circuit.
-Extension cables, frayed power cords, and missing safety grounds. If an electrical
accident occurs, proceed as follows:
accident occurs, proceed as follows:
-Use caution; do not become a victim yourself.
-Disconnect power from the system.
-Disconnect power from the system.
-
If possible, send another person to get medical aid. Otherwise, assess the condition of the victim and then call for help.
-
Determine if the person needs rescue breathing or external cardiac compressions; then take appropriate action.
4.4.
Installing a
Z2FPM9582
-Remove the
Z2FPM9582
module from its protective packaging.
-Avoiding Electrostatic Discharge .
-Before you install the
Z2FPM9582
module, ground yourself by touching a piece of metal to avoid electrostatic discharge (ESD).
You should also take the following precautions to prevent damage to the
Z2FPM9582
module:
-Keep the
Z2FPM9582
module in its antistatic-shielded bag until you are ready to install it.
-Handle the
Z2FPM9582
module by its edges.
-Ensure the connector is connected to above Model’s board tightly.