Audiotel International Limited 2-400-0001 Manuel D’Utilisation
18
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
D
ETECT
IV User Manual
AUDIOTEL INTERNATIONAL MN400872 Issue 1 (08/04)
19
IDENTIFY
MODE
This mode is used to positively identify a suspect signal as
a potential eavesdropping device within the search area.
a potential eavesdropping device within the search area.
To select the IDENTIFY mode
From the Detect screen
From the Detect screen
select the appropriate detector
press the IDENTIFY on-screen button.
The IDENTIFY screen for the selected detector is displayed.
Broadband CW Identify screen
The Broadband CW Identify screen shows a scrolling display of received broadband signal
strength against time.
strength against time.
The time scale can be changed using the Zoom In and Zoom Out on-screen buttons.
This increases or decreases the rate at which the display scrolls.
The audio output in this mode is broadband AM (Amplitude Modulation).
Alarm thresholds remain active in this mode and can be adjusted using the up and
Down controls.
When the alarm threshold is exceeded the appropriate alarm icon is displayed in the top right hand
corner of the display and an entry is made in the EVENT LOG.
corner of the display and an entry is made in the EVENT LOG.
time
signal strength
alarm threshold