Garmin International Inc 01017 Manuel D’Utilisation

A

PPENDIX

The touch screen is not 

responding to my taps.

Calibrate the screen. Press 

 on the remote. Use the remote to select 

 > 

 > 

. Follow the on-screen instructions. 

The remote control does not 

work. 

: The remote is optional in 

some Navigator III packages.

The remote is not enabled when in the advanced motorcycle cradle. Use the keys on the unit and 

cradle and touch the touch screen to operate the Navigator III when in the cradle. 
Check that two AAA batteries are installed.
Check the polarity of the batteries (+ and -).
Install fresh batteries. 
Aim the front of the remote toward the IR port on the front of the Navigator III.

How do I clear all my user 

data?
I need to reset my Navigator III.

Turn off the Navigator III and then turn it back on. During start up, press and hold the 

FIND key on 

the front of the Navigator III. Keep pressing 

 until the message “Do you really want to erase all 

user data?” appears. Touch 

to clear all user data. 

All original settings are restored. Your recent finds are also deleted. 

My phone/helmet will not 

connect to my Navigator III.

Turn off your phone/helmet. Turn it back on. The device should connect to the Navigator III. If not, 

turn the device off and turn the Navigator III off. Turn them back on. 

Be sure you have loaded the USB drivers before you connect the USB cable. See 

 for information.