Garmin International Inc 0181200 Manuel D’Utilisation
GRA 5500 Installation Manual
190-01277-00
Page 1-4
Rev. A
1.5.1 TSO Compliance and Limitations
When installed as a system, the GRA 5500, which must include two Garmin approved antennas (see
) installed per
of this Installation Manual and a cockpit display of altitude
information, comprise what Garmin considers to be a minimum generic GRA 5500 system installation.
The GRA 5500 lacks a display and by itself is an incomplete system and cannot completely meet the
requirements of TSO-C87a.
The GRA 5500 lacks a display and by itself is an incomplete system and cannot completely meet the
requirements of TSO-C87a.
This article meets the minimum performance and quality control standards required by a technical standard
order (TSO). Installation of this article requires separate approval.
order (TSO). Installation of this article requires separate approval.
Table 1-5 provides a list of applicable TSOs for the GRA 5500.
1.5.2 TSO Deviations
No TSO deviations were requested or granted for the GRA 5500.
1.6 Operating Instructions
The GRA 5500 is a remote-mount LRU with no user controls or indicators, and normal operation is
completely automated. All user interface is accomplished through a compatible display and/or interface
device. For Garmin Integrated Flight Deck installations, refer to the applicable airframe specific Pilot’s
Guide documentation for operating instructions (available at
completely automated. All user interface is accomplished through a compatible display and/or interface
device. For Garmin Integrated Flight Deck installations, refer to the applicable airframe specific Pilot’s
Guide documentation for operating instructions (available at
). For retrofit installation
operating instructions, reference the operating instructions of the compatible display and/or interface
device. For operating instructions and characteristics for the automated and manual altitude self-test
capability of the appliance, see
device. For operating instructions and characteristics for the automated and manual altitude self-test
capability of the appliance, see
of this document.
1.7 Reference Documents
The following publications are sources of additional information for installing the GRA 5500. Before
installing the GRA 5500, the technician should be familiar with all referenced materials, in addition to this
manual.
installing the GRA 5500, the technician should be familiar with all referenced materials, in addition to this
manual.
Table 1-5 TSO Compliance
Function
TSO
Applicable
LRU System
(Main) SW Part
Numbers
Applicable
Boot Block SW
Part Numbers
Applicable
LRU System
(Sensor) SW
(Sensor) SW
Part Numbers
Applicable
Region List
SW Part
Numbers
Airborne
Low-Range
Radio Altimeter
TSO-C87a
Functional
Class A
006-B1447-0(_)
except
006-B1447-00
006-B1447-01
006-B1447-02
006-B1447-01
006-B1447-02
and
006-B1447-03
006-B1448-B(_)
except
006-B1448-BA
006-B1448-BB
006-B1448-BB
and
006-B1448-BC
006-B1448-0(_)
except
006-B1448-00
006-B1448-01
006-B1448-02
006-B1448-01
006-B1448-02
and
006-B1448-03
006-D3609-0(_)
except
006-D3609-00
and
006-D3609-01
Table 1-6 Reference Documents
Part Number
Document
190-00313-12
Circular Connector (and Configuration Module) Installation Instructions
190-00303-00
G1000 System Installation Manual
190-00903-00
G1000 Integrated Flight Deck (LJ/VLJ) System Maintenance Manual
190-00907-00
G1000 System Maintenance Manual Standard Piston/Turboprop Aircraft
DRAFT