Garmin International Inc 02723 Manuel D’Utilisation

BC™ 35 WIRELESS BACKUP

CAMERA

Installation Instructions

See the Important Safety and Product Information guide in the product box for

product warnings and other important information.
Garmin

®

 strongly recommends having an experienced installer with the proper

knowledge of electrical systems install the device. Incorrectly wiring the power

cable can result in damage to the vehicle or the battery and can cause bodily

injury.
When connecting the power cable, do not remove the in-line fuse holder. To

prevent the possibility of injury or product damage caused by fire or overheating,

the appropriate fuse must be in place as indicated in the product specifications.

In addition, connecting the power cable without the appropriate fuse in place will

void the product warranty.

Always wear safety goggles, ear protection, and a dust mask when drilling,

cutting, or sanding.

When drilling or cutting, always check what is on the opposite side of the surface.

These installation instructions do not apply to a specific vehicle type, and are

meant as a guide when installing this product on your vehicle. For questions

specific to your vehicle, you should contact the vehicle manufacturer.

À

Transmitter

Á

Camera

Â

Camera mounting bracket

• Drill and 10.008 mm, or size X (0.397 in.) drill bit

Printed in Taiwan

December 2017

190-02351-90_01