Garmin International Inc 03023 Manuel D’Utilisation

See the Important Safety and Product

Information guide in the GPS device

product box for product warnings and

other important information.
Garmin

®

 strongly recommends having an

experienced installer with the proper

knowledge of electrical systems install the

device. Incorrectly wiring the power cable

can result in damage to the vehicle or the

battery and can cause bodily injury.

Always wear safety goggles, ear

protection, and a dust mask when drilling,

cutting, or sanding.

The metal contacts on the GPS device

and the mount should be kept dry to avoid

equipment damage. Use the weather cap

on the mount at all times when the unit is

not mounted to keep the metal contacts

dry and protected.
To obtain the best performance and to

avoid damage to your boat, install the

device according to these instructions.
Read all installation instructions before

proceeding with the installation. If you

experience difficulty during the installation,

contact Garmin Product Support.

• Drill
• Phillips screwdriver
• 9.5 mm (

3

/

8

 in.) wrench or socket

• 3 bolts or 3 screws:

◦ #8 (4 mm) pan-head machine bolts

with nuts and washers, and a

5 mm (

5

/

32

 in.) drill bit

◦ #8 (4 mm) pan-head self-tapping

screws and a 1.5 mm (

1

/

16

 in.) drill

bit

The swivel base must be mounted using

pan-head machine bolts or self-tapping

screws. Using screws with countersunk

heads can damage the mounting bracket.

DRAFT

A

ng an

 an

oper

ms install the

ms install the

he power cable

he power cable

the vehicle or the

the vehicle or the

se bodily injury.

dily injury.

DR

DR

D

D

safety goggles, ear

safety goggles, e

a dust mask whe

a dust mask wh

D

D

all

all

ng with th

ng wi

ience difficulty d

ience diff

ntact Garmin Product

ntact Garmin Pr

•

•

Drill

Drill

• Phillips sc

Phil

• 9.5 mm

• 9.5 m

• 3  b

3 b