Garmin International Inc 03023 Manuel D’Utilisation

The device should be mounted in a

location that provides a clear view of the

screen and is easy to reach.
The device should be mounted in a

location that is sturdy enough to support

the mount and device.
The device must be mounted in a location

that allows room to route and connect the

cables. You should allow at least 8 cm

(3 in.) of clearance behind the case.

Separate the swivel base 

➀

 from the

mount.

Using the swivel base as a template,

mark the pilot hole locations 

➁

.

Select an option:
• If you intend to secure the base

with machine bolts, drill three 5 mm

(

5

/

32

 in.) holes.

• If you intend to secure the base

with self-tapping screws, drill three

1.5 mm (

1

/

16

 in.) starter holes.

127(Do not make the holes

deeper than half of the screw

length.

Secure the swivel base with the bolts

or screws 

➂

.

Place the swivel mount bracket 

➃

over the swivel base and secure it with

the short knob 

➄

.

Align the slot 

➀

 on the back of the

cradle with the long mounting knob 

➁

,

2

Important Safety Information

DRA

e

se as a temp

se as a tem

ations 

ations 

T

swivel b

swiv

ws 

ws 

➂

➂

.

.